Detection Eye intraoral scanner
)
With Zirkonzahn's new Detection Eye intraoral scanner, the patient's jaw can be easily digitised in
less than 60 seconds. The scanner is easy to use and the choice of two different tips (standard and
small) makes the impression-taking more comfortable for the patient. The scanner has been
designed to be lightweight, compact and ergonomic and the scanning areas do not need to be pre-
Once the data has been captured, it can be easily and quickly loaded into the Model Maker software
module, for the design of a model. The created model is then transferred to the new
Zirkonzahn.Slicer software, where it is placed on the printing platform and, if needed, special
supports can be generated. The software is conceived for the dental workflow and is supplied with
The 3D print data generated can be transferred to Zirkonzahn’s P4000 Printer either via USB, LAN or
WiFi, and the large print volume (L x W x H: 20 x 12,5 x 20 cm) permits the simultaneous production
of, for instance, up to 21 Geller models or 15 dental arches, depending on their structure and
dimensions. The P4000 3D printing system works ideally in combination with the Printer Resins and
Printer Resins Waterbased by Zirkonzahn, available in many colours and for different uses.
The model can be cleaned in an ultrasonic bath and then cured in the L300 Post-Curing Lamp.
Subsequently, it can be positioned into the PS1 articulator or ZS1 Mini-Arti without the use of plaster
thanks to the new JawAligner PS1 or ZS1 (magnetic spacer plates), in order to check the patient's jaw
movements.
less than 60 seconds. The scanner is easy to use and the choice of two different tips (standard and
small) makes the impression-taking more comfortable for the patient. The scanner has been
designed to be lightweight, compact and ergonomic and the scanning areas do not need to be pre-
treated with powder, which simplifies the acquisition process.
module, for the design of a model. The created model is then transferred to the new
Zirkonzahn.Slicer software, where it is placed on the printing platform and, if needed, special
supports can be generated. The software is conceived for the dental workflow and is supplied with
pre-configured settings for a seamless and well-calibrated print process.
WiFi, and the large print volume (L x W x H: 20 x 12,5 x 20 cm) permits the simultaneous production
of, for instance, up to 21 Geller models or 15 dental arches, depending on their structure and
dimensions. The P4000 3D printing system works ideally in combination with the Printer Resins and
Printer Resins Waterbased by Zirkonzahn, available in many colours and for different uses.
The model can be cleaned in an ultrasonic bath and then cured in the L300 Post-Curing Lamp.
Subsequently, it can be positioned into the PS1 articulator or ZS1 Mini-Arti without the use of plaster
thanks to the new JawAligner PS1 or ZS1 (magnetic spacer plates), in order to check the patient's jaw
movements.
.png){kind=logo}
